Commercial Hardware: CSP112-5, CSP135-1, CT03061
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| CSP112-5 CSP1125 | 5340-00-064-3771 | Clip, Spring Tension | Hole Diameter: 0.125 inches nominal Width: 0.380 inches nominal Overall Height: 1.060 inches nominal | Bombardier Aerospace Aerospace Div. (71867) | |
| CSP135-1 CSP1351 | 5340-00-885-3597 | Fairlead, Block | END Item Identification: Aircraft model C7A Special Features: PLASTIC;2.000 in lg, 0.500 in wd, 0.250 in ht | Bombardier Aerospace Aerospace Div. (71867) | |
| CSP135-2 CSP1352 | 5340-00-885-3595 | Fairlead, Block | END Item Identification: Aircraft model C7A Special Features: PLASTIC;2.000 in lg, 0.500 in wd, 0.250 in ht | Bombardier Aerospace Aerospace Div. (71867) | |
| CSP136-1 CSP1361 | 5340-00-885-3598 | Fairlead, Block | END Item Identification: Aircraft model C7A Special Features: PLASTIC;1.150 in lg, 0.500 in wd, 0.400 in ht | Bombardier Aerospace Aerospace Div. (71867) | |
| CSP136-2 CSP1362 | 5340-00-885-3599 | Fairlead, Block | END Item Identification: Aircraft model C7A Special Features: PLASTIC;1.400 in lg, 0.640 in wd, 0.400 in ht | Bombardier Aerospace Aerospace Div. (71867) | |
| CSP142-5 CSP1425 | 5340-00-886-1446 | Bracket, Angle | Bombardier Aerospace Aerospace Div. (71867) | ||
| CSP168-7 CSP1687 | 5340-00-976-9352 | Bracket, Angle | Style Designator: 6 angle Special Features: Nut and rivets attached to 2ND leg First leg Angle: 90.0 degrees nominal | Bombardier Aerospace Aerospace Div. (71867) | |
| CSP3417 | 5340-00-318-0521 | Connector, rod End | Material: Steel overall Style Designator: 63 connector Special Features: Bronze bushing press fitted into pivot pin hole | ITT Enidine Inc. (24403) | |
| CSP3493 | 5340-00-895-6473 | Cup, Compression | Material: Rubber overall Overall Length: 0.750 inches nominal III Fsc Application Data: Boom hoist cylinder, comb at tank recovery vehicle | ITT Enidine Inc. (24403) | |
| CSP80-8 CSP808 | 5340-00-205-5244 | Button, Plug | Head Height: 0.078 inches nominal Overall Height: 0.266 inches nominal Head Outside Diameter: 0.656 inches nominal | Bombardier Aerospace Aerospace Div. (71867) | |
| CSP-854-25-25 CSP8542525 | 5340-01-408-7057 | Glide, Furniture | Material: Steel overall Style Designator: G4 square Surface Treatment: Cadmium and chromate overall | Cabrac Inc. (2V623) | |
| CSR30716 | 5340-00-497-0293 | Clip, Spring Tension | Material: Steel comp 1095 overall Material Document and Classification: MIL-S-7947, cond a mil spec single material response overall Length: 0.600 inches nominal | California Spring Co. (71447) | |
| CSR523-3-3 CSR52333 | 5340-01-540-4188 | Retainer, Assembled nut | Special Features: Retainer nut for CS5000-SERIES captive screws III End Item Identification: F18 E/F fighter aircraft III Part Name Assigned By Controlling Agency: Nut, retainer | Fastener Innovation Technology Inc. (58998) ITT Corporation (28527) | |
| CSS-632-4 CSS6324 | 5340-01-412-3516 | Standoff, Threaded, Spacing | Penn Engineering & Manufacturing (46384) | ||
| CSS93236 | 5340-00-780-6590 | Snap Hook Assembly | General Characteristics Item Description: C/O 2 rings, 1 snap and 1 chain | Carrier Corporation (10855) | |
| CSSC112 | 5340-01-424-3768 | Clamp, Loop | Cardion Inc. (12909) Target Corporation (20284) | ||
| CST32-2 CST322 | 5340-01-211-1420 | Retainer, Helical Compression Spr | Johnson Controls Inc. (50831) | ||
| CST33-2 CST332 | 5340-01-211-1420 | Retainer, Helical Compression Spr | Bosch Rexroth GMBH Lohmann (D9182) | ||
| CSZ-410 CSZ410 | 5340-01-336-4411 | Cap, Protective, Dust and Moisture | Actuant Corp. (26952) | ||
| CT03061 | 5340-01-398-9474 | Strap, Webbing | AGM Container Controls Inc. (08992) |